TV Mounting and Furniture Assembly in the Phoenix Area
Quick jobs that are annoying to do yourself. We mount TVs securely into studs, assemble furniture, and hang shelves, mirrors and artwork level.
What We Do
- TV wall mounting
- Hiding cables in the wall
- Furniture assembly
- Shelves and floating shelves
- Mirrors and artwork
- Curtain rods and blinds
Hanging a television or building a bookcase sounds like a thirty minute job until the studs are not where you expected, the wall turns out to be something unusual, or the instructions skip a step. These jobs reward preparation more than muscle. This guide covers how we plan a mount, what can go wrong, and the small decisions that make the finished result look clean and stay safe.
Signs it is time to get help
The usual trigger is a TV sitting on a dresser or a stand that no longer fits the room, or a new TV that is larger than the old one and needs a real mount. Others call because they have a pile of flat pack boxes, a stack of art that never got hung, or a cable cluster they would like to hide.
Another good reason to call is uncertainty about the wall. If you are not sure whether you have wood studs, metal studs, plaster, masonry or a fireplace surround behind the surface, it is better to have someone check than to drill and hope.
If you are moving, redecorating or have had a mount fail before, that is also a good time to bring in a second set of hands. A short visit can clear a whole list of small jobs at once.
How a TV mounting job goes
We start by talking through where you want the screen and what you will watch from. Height and angle matter more than people expect, and we like to sit in your usual spot and check the sight line before drilling. Then we locate studs and look for hazards such as wiring runs and plumbing.
Next we choose a mount that suits the TV size, weight and your wall, level it, and fasten it into solid framing with the right hardware. After the TV is hung we confirm it is secure, adjust it level, and manage the cables. If you want the wires hidden, we can route them inside the wall with a proper pass through rather than leaving them hanging, and we will tell you if a certain wall makes that impractical.
- Agree on screen position and height
- Locate studs and check for hidden hazards
- Select the right mount and hardware
- Fasten, level and test
- Tidy or conceal the cables
Walls and conditions in Arizona homes
Most newer homes have drywall over wood or metal studs, and the type of stud changes the hardware. Metal studs need different fasteners than wood. Many homes also have stucco on the outside and block on some walls, which is great for strength but needs masonry anchors and the right bits. Patios and covered areas need mounts and TVs rated for outdoor use, and heat can be hard on electronics left in direct sun.
Large open rooms and tall ceilings are common here, so we often work with big screens that call for heavier mounts and more careful placement. Fireplaces are another common spot, but heat and height can make that location uncomfortable to watch and hard on the TV, so we talk through the options before we mount over one.
Mistakes and risks when doing it yourself
The classic mistake is mounting into drywall alone with plastic anchors. A modern TV is heavy and sits far from the wall, which puts a surprising amount of leverage on the fasteners, and a failure can ruin the TV and hurt someone. A mount must hit studs or use hardware rated for the load.
Other common problems include mounting too high, which strains the neck, choosing a mount that does not match the TV's hole pattern, and cutting into a wall without checking for wires or pipes. Running a power cord inside a wall is a separate issue, because standard extension cords should not be run inside walls. For in wall power, a licensed electrician is the right call, and we will tell you when a job needs one.
What affects the cost
Time and complexity drive it. A simple mount on an open wall is quick. Larger TVs, articulating mounts, masonry or metal stud walls, and hiding cables inside the wall take longer. Furniture assembly depends on the number and difficulty of pieces. Shelves, mirrors and art depend on weight and how many we hang.
Bundling saves time. If you have a TV, a shelf, a mirror and some curtain rods, doing them in one visit is more efficient than separate trips, and it lets us plan the layout so everything looks coordinated.
What to have ready
Have the TV out of the box or accessible, along with its mount if you bought one. If you did not buy a mount, we can advise on the type and size, and we only need the TV model and rough weight. Tell us where you want the screen, what is nearby, such as a cable box or soundbar, and whether you want cables hidden.
For assembly, keep boxes unopened or at least accessible and make sure the room is clear. Photos of the wall and the space help us scope accurately and bring the right hardware. We confirm the plan with you before drilling, so nothing surprises you.
If you are hanging heavy mirrors or shelves, tell us what will go on them. A shelf that holds books needs stronger fastening than one that holds a few frames, and knowing the load lets us pick the right anchors and spacing from the start.
Limits and when to bring in someone else
We mount and assemble; we do not do low voltage wiring projects beyond simple cable routing, whole home audio systems or new electrical circuits. If you want an outlet moved or added behind the TV, that is electrician work. Very large or very heavy installations, commercial displays, or mounting to walls we cannot verify as safe are cases where we will say no or recommend a specialist. We would rather tell you honestly than risk your TV or your wall.
TV Mounting and Assembly Near You
Pick your city to see how we handle tv mounting and assembly there.
Common TV Mounting and Assembly Jobs
Frequently Asked Questions
Can you mount my TV on any wall?
Almost any. We find the studs, use the right anchors and level it. We will let you know if a wall type needs special hardware.
How high should I mount my TV?
A common guideline is to place the center of the screen near eye level when seated. We confirm by sitting where you normally sit and checking the sight line before we drill.
Can you hide the cables without cutting into the wall?
Yes. If an in wall route is not practical, we can use a clean cable cover that matches the wall. For in wall routing we use proper pass through plates, and any new electrical outlet is a job for an electrician.
Do you supply the mount?
We can advise on the right type and size for your TV and wall. You are welcome to buy your own, and we will check that it fits the TV and can safely hold its weight.
Can you assemble furniture I bought online?
Yes. We assemble desks, dressers, bookcases, beds and more, and we can anchor tall pieces to the wall for safety. Keep the hardware bags and instructions together so we can start right away.
Recent Work Around the Valley
Ready to check one more thing off your list?
Free estimates. Upfront pricing. 100% satisfaction guaranteed.